The range includes three four-pole models with 7, 11 and 15 holes respectively.
The individual phase can be wired separately before it is snapped onto the base plate.
The same holder can be screwed or snapped onto a DIN rail. Up to 10 m2 can be derived at each pole. The special stepped configuration of the stand optimises space requirements.
| Cod. | No. poles | Number of holes per rod | Hole diameter (mm) | Conductor cross-section without ferrule (mmq) | Tightening torque (Nm) | Capacity (A) | Pack. (pcs) |
|---|---|---|---|---|---|---|---|
| KCM1007 | 4 | 7 | 5,4 | 1,5/10 | 2 | 57 | 1 |
| KCM1011 | 4 | 11 | 5,4 | 1,5/10 | 2 | 57 | 1 |
| KCM1015 | 4 | 15 | 5,4 | 1,5/10 | 2 | 57 | 1 |
per ottenere più informazioni circa il prodotto desiderato
